Skip to main content

Iftikhar Electronics

jinko solar N type Bificial 585w

jinko solar N type Bificial 585w

Jinko Solar Tiger Neo 585W N-Type Bifacial Solar Panel

The Jinko Solar Tiger Neo 585 W is a high-efficiency N-type monocrystalline Topcon bifacial solar module designed for residential, commercial and utility-scale photovoltaic installations. The module uses a dual-glass construction, allowing the rear side of the panel to convert reflected and scattered sunlight into additional electricity.

The 585 W version belongs to JinkoSolar’s 72HL4-BDV series. The relevant model designation is JKM585N-72HL4-BDV in the F4C1 datasheet, while a later F9C1-OC version is also listed in the 585–610 W family. Because JinkoSolar has multiple revisions of the 72HL4-BDV series, the exact model number printed on the panel label should be checked before purchasing or specifying the module.

1. Basic Product Specifications

Specification JinkoSolar 585W Bifacial
Manufacturer JinkoSolar
Product family Tiger Neo
Module type JKM585N-72HL4-BDV
Cell technology N-type monocrystalline TOPCon
Bifacial Yes
Construction Dual glass
Number of cells 144 (72 × 2)
Rated power 585 Wp
Module efficiency 22.65%
Power tolerance 0 to +3%
Maximum system voltage 1500 V DC
Maximum series fuse 30 A
Operating temperature -40°C to +70°C for the later F9C1-OC version
Bifaciality coefficient Pmax 80 ±5%

The manufacturer’s datasheets show the 585 W module at 22.65% efficiency under STC and a positive power tolerance of 0 to +3%.

jinko solar bificcial 585 watt by iftikhar electronics


2. Electrical Specifications — 585W

The most important electrical values for the 585 W module are:

Parameter 585W Value
Maximum power (Pmax) 585 W
Maximum power voltage (Vmp) 44.02 V
Maximum power current (Imp) 13.29 A
Open-circuit voltage (Voc) 52.70 V
Short-circuit current (Isc) 14.01 A
Module efficiency 22.65%
Power tolerance 0 to +3%

These values are specified at STC — 1000 W/m² irradiance, 25°C cell temperature and AM 1.5 spectrum.

jinko solar bificcial 585 watt by iftikhar electronics

What these numbers mean

585 W Pmax:
The panel’s rated output under standard test conditions is 585 watts.

Vmp 44.02 V:
This is the voltage at which the module produces its maximum rated power under STC.

Imp 13.29 A:
This is the current produced at the maximum-power operating point.

Voc 52.70 V:
This is the open-circuit voltage when there is no electrical load connected to the panel.

Isc 14.01 A:
This is the short-circuit current under STC.

For inverter and string design, Voc is particularly important, because the voltage rises as the panel temperature falls. The inverter’s maximum DC voltage must not be exceeded.

📦 Track Order